Commit 7422902d authored by Thomas Planche's avatar Thomas Planche
Browse files

updated FIT_TOSCA.in for Dan

parent 87f5dfbc
......@@ -8,8 +8,8 @@
1 !1 or -9 (-9 disables the tracking of this particle)
'TOSCA'
0 0 !print the map (no print = 0); output along partile(s) trajectory(ies) = 2
1.0365 1. 1. 1. !Magnetic field scaling (adjusted so that R at the center=120cm+60cm*sqrt(2), 120cm is reference radius of the HRS, 60cm is the amound by which the map has been enlarge to include fringe fields); X coordinate scaling; Y; Z
0 2 !print the map (no print = 0); output along partile(s) trajectory(ies) = 2
1.1 1. 1. 1. !Magnetic field scaling (adjusted so that R at the center=120cm+60cm*sqrt(2), 120cm is reference radius of the HRS, 60cm is the amound by which the map has been enlarge to include fringe fields); X coordinate scaling; Y; Z
HEADER_2 ! Title
181 47 1 22. ! Nb of nodes in Theta; R; Z (=1 for 2D map); MOD(see manual, =0 for Cartesian, with mid-plane symmetry)
../TOSCAMOD22.dat !File name
......@@ -17,13 +17,18 @@ HEADER_2 ! Title
4 !IORDRE(=2, 4 or 25 if 2D, unused if 3D)
0.1 !Integration step size[cm]
2 !KPOS, normally=2
200.0 0. 200.0 0. !RE has been fitted to be =RS; TE=0 because the map opening = the bending angle = 90 deg; RS=RE; TS=-TE
180.13968 0. 180.13968 0. !RE has been fitted to be =RS; TE=0 because the map opening = the bending angle = 90 deg; RS=RE; TS=-TE
'FIT'
1 !number of variables
2 70 2.072 0.5 !element#2 (TOSCA); parameter #70 (RE); correlation set so that RE=RS (which is parameters#72 of element #2)
1 !number of constraints
2 1e-6 100!number of constraints
3 1 2 2 0.0 1. 0 !3:particle coordinate; 1: particle #1; 2: Y(i.e. R); where?:at the end of element #2; wanted value=0.0; weight; 0:no additional parameters
3 1 3 2 0.0 1. 0 !3:particle coordinate; 1: particle #1; 3: T; where?:at the end of element #2; wanted value=0.0; weight; 0:no additional parameters
'FAISTORE'
tt.dat
1
'END'
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment