... | ... | @@ -22,8 +22,20 @@ Primary contact is [Spencer Kiy](http://www.triumf.ca/profiles/4827) |
|
|
8. The program will confirm when the tune is successfully loaded.
|
|
|
9. Manually load the listed read-only PVs (if desired).
|
|
|
|
|
|
**ISAC/RIB Specific FAQs:**
|
|
|
|
|
|
**FAQs:**
|
|
|
Q: *How does tuneLoader determine which RF cavities should be on/off?*
|
|
|
|
|
|
A: tuneLoader always expects the prebuncher, RFQ, and 11 MHz chopper to be on.
|
|
|
The app decides to use bunch rotator on or off based on the current status in EPICS.
|
|
|
MEBT rebuncher and DTL on/off status is determined based on the DTL energy per nucleon requested by the user.
|
|
|
The SC linac takes the amplifiers that are on as available cavities, then calculates the energy gain through each cavity until it reaches the user-requested energy per nucleon. Based on this the app displays which cavities should be on and which should be off.
|
|
|
|
|
|
Q: *How are RF amplitudes calculated?*
|
|
|
|
|
|
A: Based on a reference tune they are scaled with the beam A/Q to reproduce the functionality of the ISAC Optics-I and Optics-II spreadsheets. SC Linac amplitudes reference values are automatically set to the current epics values and are not scaled.
|
|
|
|
|
|
**General FAQs:**
|
|
|
|
|
|
Q: *Why can't I select some PVs in tuneLoader?*
|
|
|
|
... | ... | |