|
|
The tuneDisplay application shows an overview of the deviation of actual read back values (Setpoints) to calculated values (Theoretical values) for all devices along a desired beamline chosen from a source, e.g. OLIS, to an experiment, e.g. TIGRESS in two graphs. Thereby on top of the page both the beamline information and the beam information as for example the beam energy and charge states are shown.
|
|
|
|
|
|
The tune overview displays the start of the beamline left hand side at the upper graph and the end at the right hand side of the lower graph. The different devices are displayed as they occur along the beamline. This should help to visualize how i.e. quadrupoles or steerers affects the beam in a matching section or for a transport section. For a good tune the deviation of the actual readback value (Setpoint) to the calculated value (Theoretical value) is small, ideally none.
|
|
|
|
|
|
All different device types are displayed in their own color, as it is shown on the pages bottom. Each button can turn on and off the highlighting effect for its device type. By default all types are highlighted.
|
|
|
|
|
|
Hovering with the cursor over a bar chart (or its position), a black box shows all information about this device, its name, the Theoretical value, its Setpoint and the Deviation between both.
|
|
|
|
|
|
The deviation calculation is described at the **[tuneDisplay](https://gitlab.triumf.ca/hla/beam/tuneX/wikis/tunedisplay)** page.
|
|
|
|
|
|
<br>
|
|
|
<br>
|
|
|
|
|
|
**Welcome to the tuneDisplay help page!**
|
|
|
|
|
|
Something wrong with the application?
|
... | ... | @@ -30,6 +17,8 @@ Primary contact is [Spencer Kiy](http://www.triumf.ca/profiles/4827) |
|
|
3. Select the relevant beam path.
|
|
|
4. Input desired beam parameters and select tune (by default a standard tune is selected)
|
|
|
5. Press 'Display'.
|
|
|
6. Hover over the chart to see information about the devices, calculated septoints, EPICS septoints, and deviations.
|
|
|
|
|
|
|
|
|
**ISAC/RIB Specific FAQs:**
|
|
|
|
... | ... | @@ -37,4 +26,6 @@ Content to be added |
|
|
|
|
|
**General FAQs:**
|
|
|
|
|
|
Content to be added |
|
|
\ No newline at end of file |
|
|
Q: *How is the deviation for beamline optics calculated?*
|
|
|
|
|
|
A: The deviation calculation is described at the **[tuneDisplay](https://gitlab.triumf.ca/hla/beam/tuneX/wikis/tunedisplay)** page. |
|
|
\ No newline at end of file |